nice its a well working cdi from daytona, depend on how adjusted more peak power but might ruind ur crank or engine. this is battery DC power cdi united
View Detail
- Eladás
- Instock
25,430.06 HUF (10,975 JPY) 29,658.75 HUF Mentés 14%
Webike Point: +110 pt
(254.87 HUF)
Kézbesítési információ
In Stock : 4 left, Ships within 24 hours.
Estimated arrival date around
Illesztés
HONDA
Open Fit Model Information Table
-
XR100MOTARD
(AD13-1000001-) M
-
XR50 MOTARD
XR50M7 (AD14-1000001)
-
APE 100 TypeD
XZ100 (HC13-1000001-
-
APE 100 TypeD
XZ109 (HC13-1000001-
Az összes
HONDA
A termék az alábbi leírást automatikusan lefordítja a Google.
Termék leírás
** Ez a rész megköveteli a vezetékes feldolgozást.
* Az oldalsó állvány biztonsági eszköze nem működik.
* Ha behelyezi a terhelést a dip-kapcsolóra a beállításhoz, a kapcsoló test károsodhat.
* Nem alkalmazható a MONKEY-ra (09-) vagy az APE50 üzemanyag-befecskendezési modellje (12/7)..
Annak érdekében, hogy teljes mértékben kivonja a Potenciál a NORMAL és a Bore up motor, programozás optimalizált gyújtás időzítés teljes forgatási tartomány teljes digitális.
Ezenkívül ez megfelel a MONKEY-nek? APE, ahol különböző EngineSpec. Létezik, elfogadja a Recta bull típust, amely 3 fokozatú gyújtási programot és 4 fázisú LimiterProgram-ot választhat.
● A gyújtási minta beállítása? A fordulatszám-korlátozó Dip-kapcsolóval állítható.
● Gyújtási minta: 3 szakasz a verseny, 2-es út, utca.
● Limiter: Nincs, négy fokozat 13.000 fordulat / perc, 12.000 fordulat / perc, 11.000 fordulat / perc.
● Anyag: Hozzájárulás a súlycsökkentéshez a PlasticCase alkalmazásával.
● Tekintse át a rögzítési módot, a NORMAL gombbal rögzíthető a rögzítéshez.
● Hozzájárulás a vibrációs ellenintézkedésekhez a Gumi tartó használatával.
● Nincs Tachometer pickupWiring.
Vigyázat
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
HONDA
- XR50 Motard
- XR50 Motard
- XR50 Motard
- APE50
- APE50
- APE50
- APE50
- APE50
- APE50
- APE50
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- GORILLA
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- MONKEY
- XR100 Motard
- XR100 Motard
- XR100 Motard
- APE100 TYPE D
- APE100 TYPE D
- APE100
- APE100
- APE100
- APE100
- APE100
- APE100
- APE100
- APE100
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Vásárlói vélemények
Reviews with image
- MINDEN
- Japan (40)
- Russia (9)
- Thailand (3)
- Vietnam (2)
- (1)
- China (1)
- Greece (1)
- New Zealand (1)
- Philippines (1)
Fits:HONDA XR100MOTARD (AD13-1000001-) M5, HONDA XR100MOTARD (AD13-1000001-) M7, HONDA APE 100 XZ104 (HC07-1000001-), HONDA APE 100 XZ103 (HC07-1000001-), HONDA APE 100 XZ102 (HC07-1000001-)
Fits:HONDA XR100MOTARD (AD13-1000001-) M5, HONDA XR100MOTARD (AD13-1000001-) M7, HONDA APE 100 XZ104 (HC07-1000001-), HONDA APE 100 XZ103 (HC07-1000001-), HONDA APE 100 XZ102 (HC07-1000001-)
Aug 21, 2021
Intermediate acceleration is now more powerful.
I put together a DAX with CD90Engine + CP105ccBore Up Kit and this CDI.
I was hoping the Engine, which hits a head start at 9000 RPM, would spin more.
If anything, the power in the middle range has increased and the ease of riding has improved.
I think the max went from just under 9,000 to about 9,500.
Maybe I need to replace the carburetor (PC20 to VM24 or YOSHIMURA) to turn the engine more...
Size is Large threshold when compared with OEM, but DAX can fit the attached Rubber parts to the position where OEM was.
I was able to use it to install it.
You also need to convert the 6-pole Coupler to a 4-pole + 2-pole Coupler, which is done by adding KITACO's Parts to the
I responded using.
A 12Bolt Attachment power supply is required separately, but the required Bullet Type Terminal is included.
But the Wiring to Regulator is short, so I took out the Power Cord with solder instead of Bullet Terminal.
Helpful?
Fits:HONDA XR100MOTARD (AD13-1000001-) M5, HONDA XR100MOTARD (AD13-1000001-) M7, HONDA APE 100 XZ104 (HC07-1000001-), HONDA APE 100 XZ103 (HC07-1000001-), HONDA APE 100 XZ102 (HC07-1000001-)
Jul 26, 2020
Do you think it's a safe bet that you'll be able to choose the right place to install it?
I'm looking forward to installing the parts one by one and setting them up while checking the differences, and since I've finally reached the point where I can install them, I'd like to post an Impression.
In my personal opinion, I don't think that Parts that don't require re-setting will significantly improve performance, but only within the safety margin of a standard vehicle at about NORMAL+α I think that there is no element of performance up.
Durability is a standard vehicle with plenty of safety margins that the Manufacturer has spent tens of millions of dollars designing and I believe that Balance is getting it.
Tuning can be done with a good balance, so that the vehicle will not break down and is easy to drive, just like a standard vehicle.
This time, I've completed the Engine Displacement VolumeUp and Carburetor settings and have been using it for a while for touring and commuting.
I put it on the pontoon to see how far it changes just by the time of ignition.
I'm using PWK28 and the results are beginning to open the Axel (At the Limit where Throttle starts to move.) and it was awkward, so I had to re-set it.
PWK, which has a good point in Response and blowout, became a disappointment. Then, the Throw was upgraded to the 2nd position and the Main was also upgraded to the 1st position.
Now it's better.
However, I'm in the process of finding a good place for settings 2 and 3 at the moment, so I haven't gotten to the point where I'm settled on this one, but there are quite a few differences.
In the case of my vehicle, the Jet changes for some reason between settings 2 and 3, so it's going to take a while.
Before work PJ42 MJ110 Needle middle Screw1+270° AnalogCDI
Tentative value PJ48 MJ112 Needle middle Screw1+180° DigitalCDI setting 3
Until the setting is complete, the fixation is also tentatively fixed to a place where the Switch can be operated in the interim.
Helpful?
Fits:HONDA XR100MOTARD (AD13-1000001-) M5, HONDA XR100MOTARD (AD13-1000001-) M7, HONDA APE 100 XZ104 (HC07-1000001-), HONDA APE 100 XZ103 (HC07-1000001-), HONDA APE 100 XZ102 (HC07-1000001-)
Jun 29, 2019
You can't go wrong with this product!
It's expensive, but it's good for the price
The map is well done and the sparks are strong
It's not difficult to install, as you just have to get the power off
With GIORCUB, it's a good idea to pull the power supply from the IGN power supply (Black)
Helpful?
Fits:HONDA XR100MOTARD (AD13-1000001-) M5, HONDA XR100MOTARD (AD13-1000001-) M7, HONDA APE 100 XZ104 (HC07-1000001-), HONDA APE 100 XZ103 (HC07-1000001-), HONDA APE 100 XZ102 (HC07-1000001-)
Jun 5, 2019
Both Torque and Power will increase
You can feel the increase in torque and power in 3rd to 5th gears used in Circuit etc., and Lap It leads to time
You can also set the rotation limiter, so it is recommended for the Tuning engine
Helpful?
New Custom Articles
