?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
There were not stopping a motorcycle, starting the engine, since it was air cooling, and notes from the person of a store about R1100S at the time of purchase.
Although many motorcycles of air cooling had also ridden until now, this was the first time that such a thing was said.
Then, it decided for the oil temperature under idling to be very worrisome in what times it becomes, and to attach an oil temperature gauge.
It is decided at the point of a price and compactness as a result of examination that it will be a compact LCD thermometer made from a takegawa.
(It did not refer to an oil temperature gauge.)
It can be found by chance and lucky.
The main part regarded as selling more if it can refer also to an oil temperature gauge should stick a magic tape on a flesh side, and should cling beside a meter panel.
A sensor attaches PT1/8 to an adapters, and exchanges it for a drain bolt.
The cord of pre-attachment was of use for sensor wiring.
A power source is connected to the socket of the small ball of DORAITO to the result of examination.
Now, in conjunction with a main switch, a thermometer is turned on.
Since it purchased with the back light, a number can be read very vividly.
Now, although it was an oil temperature of R1100S, during idling, the oil temperature goes up rapidly and it stopped the engine in the place which became 110 邃?
During a run, temperature goes up by 70 邃?~ about 80 邃?and traffic congestion until it exceeds 90 邃?
By having attached the oil temperature gauge, I can know an engine state and think that it was good.
Attached to Monkey.
Wiring can also easily connect and satisfy visibility.
Large is not too small, too large Large is just right.
Peak hold function is also attached, but it is reset when turning off the power.View Detail
There is no water temperature gauge in TENERE, and the warning light is lit up when abnormally high temperature is reached, the water temperature is not understood at all at all. Especially during low-speed GEAR driving in the forest road, the electric fan was going around and I was worried when it would be Overheat. After installing the water temperature gauge, you can understand the water temperature of the body and the state of the engine, so you can run safely.
Back light is White LED, so you can see well even at chira while driving at night.
For installation, I made my own Bracket and attached it to NavigationBracket. Temperature sensor is the same SP made by Takegawa For Water Thermometer Adapter (Φ22mm) , Using Radiator hose (Radiator entrance side) I installed it by interrupting it.
If the model does not have a water temperature gauge, we recommend installing it before Overheat or breakdown. It is quite obvious if you display the water temperature as a numerical value.View Detail
The feature of a product is as a Title.The
display is also large, and since there is no display of those other than water temperature, it is simple and very legible.Even if
attachment also included the time of Coolant exchange, it was about 1 hour.Although he may hear that their brains are racked for the setting position of a meter body by
GPZ 900R, the Meter-unit mounting hole of a Upper cowl stay is used as a photograph, and the Crank type Angle of purchase is fixed as a Base in the Home center.The visibility which gets on by having been satisfactorily settled since the
main part was small was also good.View Detail
[Webike Monitor] It purchased in connection with the Bore up of
RZ50.Water temperature management is important for a Bore up.As for the worst, a Detonation occurs.This product is very legible and the Back light and the temperature change are also solid.Although it worried about whether
pure Thermostat is removed, it turned out that it is not necessary to remove, thanks to this water thermometer.It is a good product.View Detail
Although others are also written, since a number is displayed greatly, it is very legible.
Even if a back light at night is beautiful and basks in sunlight from where daytime also, it can be read clearly.
Wiring was taken from the tail so that there might be little influence, when there should have been trouble.
The earth was made into the body ground.
Although it is a uniquely uneasy point that there was no explanation of water proof and a non-watertight type anywhere, it uses believing that it is water proof.View Detail
Fits: HONDA DAX125 (JB06), HONDA MSX125SF (MLHJC92), HONDA MSX125 (MLHJC92), HONDA GROM (JC61-1300001-), HONDA GROM (JC75-1000001-)
The kit fits on the Honda dax st125 jb04 model 2023. I had to be creative with how to install it and found a way to do it, everything works great, quality product from takegawa as always.View Detail
Fits: HONDA DAX125 (JB06), HONDA MSX125SF (MLHJC92), HONDA MSX125 (MLHJC92), HONDA GROM (JC61-1300001-), HONDA GROM (JC75-1000001-)
About quality and texture, I can confirm that the quality is great and that the material used on the handlebar clamp and drain bolt is aluminum with anodised finishes and the display uses LED technology. About the feeling of use, Simple display with only a temperature function but a wonderful designed temperature guage for the Monkey bike that is easily visable in the daylight and at night time. Products to buy together, This product is all inclusive so nothing else needed for it's operation but also adding an oil cooler setup to your cart would be ideal. Difficulty of installation, I can say the fitment of the thermometer kit was average due to the access required for the wiring n the headlight bucket and all the way down to the drain bolt area. Handlebar clamp installation was easy to complete. Cost performance and comparison with other products, The pricing of the product is good. You receive the best looking handlebar mounted temperature guage for the Monkey. There are cheaper options without the handlebar clamp that still display the same information but don't look anywhere near as good. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View Detail
About quality and texture have a simple configurationAbout the feeling of use be properly markedProducts to buy together SP TAKEGAWA Bracket For Compact LCD Meter , SP TAKEGAWA Drain Bolt (w/ Magnet) ,SP TAKEGAWA Big Bore Difficulty of installation easyCost performance and comparison with other products There is no difference in price from other companies I think it's the difference in preferenceAbout shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing I have SP TAKEGAWA S-Stage Big Bore Kit 115cc cylinder and SPTAKEGAWA drain bolt, so connection is not difficult, but cable arrangement is really difficult. Now that I have a thermometer, I'm relieved to know the condition of the engineView Detail
Fits: HONDA DAX125 (JB06), HONDA MSX125SF (MLHJC92), HONDA MSX125 (MLHJC92), HONDA GROM (JC61-1300001-), HONDA GROM (JC75-1000001-)
About quality and texture - Top quality. Beautifully machined and anodised handlebar clamp and drain bolt. The display is also excellent quality to read the temperature.About the feeling of use - I find this product very useful for keeping an eye on the oil temperature in the engine sump, I feel more comfotable riding the Monkey hard when I have an idea how the engine is coping.Products to buy together - Takegawa have so many great product for the Monkey and I paired this thermometer kit with their tachometer with rev indicator.Difficulty of installation - The installation is of a medium level of difficultly but if you follow the included instructions and take your time routing the wiring along the OEM wiring harness you will end up with a successful install in an hour or so.Cost performance and comparison with other products - OPMID offer a temperature kit that takes the reading from the OEM oil sensor in the head but from reading on the forums I don't know how actuate their readings are and both brands offer their kits for similar prices.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Takegawa now sell a tachometer with a temperature reading built-in which would now be a better option to go with I think.View Detail
There is no temperature gauge on my Kawasaki z125 pro so i bought this to monitor how hot the engine oil is. The weather temperature in my country is 365 days hot. The photo of this is outside temperature. I have seen the temperature reading as high as 120°c. The lcd display is very clear even in broad daylight. View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING