13,337.86 HUF
(5,515 JPY)
5 (5 Minden vélemény)
Excellent
ZrX1200R (2001) Reverse carI purchased with Tire exchange of ZrX 1200R. How to use prepare 2 STANDs, take a level and pass Gyro Easy there and use it.
Especially it is a good item that you can use Balance as well as ordinary for the long-lasting feeling that it does not receive impression such as being difficult to use and bad making etc..
I guess that the best part is not to take up space to store in Compact anyway.
Tire It is recommended for people who would like to exchange themselves.
Reviews For DRC Kerék szerszám Balancer Gyro Easy From Other Webike User
Excellent
Easy to moldSince it is an off-road vehicle, I installed a bead stopper to measure the WheelBalance because I had pitching when cruising at legal speed on paved roads and it was uncomfortable.
It was a good decision to use this Balancer so that it does not occupy space when not in use.
I bought it to save space when I put it away, and I'm glad I packed it in the Tool cabinet for storage.
I took Balance and improved it after driving it. It's good for reducing fatigue over long distances.
In my case, I used two ContainerBox of the same size for the base.View Detail
Excellent
Cospa is the bestThere is no better way to exchange Tire by yourself
Because there is no foundation storage is also taken place
I am using a horse for Car on the foundationView Detail
Excellent
This RecommendationIf you can prepare the foundation there is no doubt that Cospa is expensive.
I also liked Shaft's bend and rust and product quality.
Those who make their own can also be present, but simply Bearing and Shaftetc. Preparing and considering the trouble of production you will know the height of this product's cospa. It is easy and safe to buy anything other than a very self-made faction.
Just as Bearing was astringent in my product as it is in Impre of the other person.
It was a feeling that the original Bearing oil seems to be stuck, so CRC (Just to be aware, Rubber, a non-erosive one) If you lubricate, you will be able to turn to Smooth very much.
If you actually use it, you will see that it is not Wheel bearing but Balancer's Bearing.. It was easy to work and I was able to take Balance in a short time.
Because it is not a thing to use frequently, it is also awkward to be able to store in Compact. After use, I applied Oil to the whole of Bearing and Shaft, wiped it off, put it in a Vinyl bag, put it in a box and applied rust prevention.View Detail
Very Good
Cost is low, easy to store benefits【What made you decide the purchase?】 Large Not including the STAND part
【How was it actually used?】 The absence of STAND is good in both the point that space at the time of storage is unnecessary and the point that Cost becomes low.
【Was it difficult to install? (Hard parts case)】 Shaft is good to have Wheel Center firmly. In the past Balance was taken with an appropriate stick, but it was made very easy with this product.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Because it does not come with a dedicated STAND, we need some level table. I used a car horse. I think everything is good at Block.
[Is there anything I was disappointed about?] In order to rotate Shaft to Smooth, Bearing is attached to the receiver, but the rotation was heavier than I expected. It was rotating with Bearing on the Wheel side.
【Hope for Manufacturer - Please let me know if there are any improvement points】 If you want to use what Bearing turns lighter. Or if you need oil, please state clearly in the explanation. Because it can be stored in Compact it is a nice storage Case may be suitable?
【Have you compared items?】 Gyro Stand
[Others] It is possible to use it for a long time since it can be freely used from Large type to Small Type Motorcycle.View Detail
Most Viewed Reviews Of DRC Other Maintenance Stands
Excellent
Compact sizeI used it to adjust OEMSpoke on my SR400 with 18-inches Tire and it worked fine.
It can be folded up so you don't have to worry about where to store it. I think it's a very cosy product.View Detail
Excellent
Easy to moldSince it is an off-road vehicle, I installed a bead stopper to measure the WheelBalance because I had pitching when cruising at legal speed on paved roads and it was uncomfortable.
It was a good decision to use this Balancer so that it does not occupy space when not in use.
I bought it to save space when I put it away, and I'm glad I packed it in the Tool cabinet for storage.
I took Balance and improved it after driving it. It's good for reducing fatigue over long distances.
In my case, I used two ContainerBox of the same size for the base.View Detail
Excellent
Easy to useI used to use other products as well, but the rigidity of Large is not so good in spite of its heavy weight But it could take the vibration removal work well, but when it is not used, it is a big problem I had to take it apart and put it away every time
However, this one is light, foldable and compact, and the accuracy is good, so it is Large Thankfully, you can use it
The ease of attaching and detaching the wheel to and from the STAND is a big help
If there is a complaint, the Sensor that reads the runout is not on the side of the Rim, but inside the Rim I'd like you to take it between Beads I'm using a crafted needle GoldHangerView Detail
Excellent
If it is from earlier!Since the bulky bulky bulky thing that I used to use, it was troublesome because I was disassembling and assembling every time.
DRC is light, easy to use, folds up and not bulky, this is good.
I do not know yet because I do not use it yet, but I do not know from now on, this is a good feeling.
The deflection sensor is not SIDE, Rim's bead internal Quantity : Pair (for Left and Right) I want to take it at the same time vertically and horizontally.View Detail
Excellent
Easy to useIt is necessary to use while lubricating Bearing etc..
If you forget it, each part seems to be damaging in the blink of an eye, I feel that I need attention.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING