4,116.96 HUF
(1,707 JPY)
3,948.13~ HUF
(1,637 JPY)
(4% OFF)
5 (6 Minden vélemény)
Excellent
Rear also exchange!brembo : I replaced the RearBrake Caliper 34 84 mm BridgeBolt. Like the Front, the Bolt shape is a Taper so Custom feeling will rise! Screw Length is Front - Rear is 40 mm for both. As with Front, there is a risk of insufficient strength than OEMBridgeBolt and it is dangerous - - - After replacement Circuit, pass etc. etc. I never use Brake on Hard, so I think I'm safe to ride on a regular basis and I'm durable. If you encounter problems after BridgeBolt exchange, I will borrow this place and report it to everyone! - - - It became the same use as Front Parenthesis It got better!
Reviews For KOHKEN (KOHKEN DENKA) M8 rozsdamentes kúpos sapkás csavar From Other Webike User
Excellent
I have various opinions - - -Brembo : Brake caliper 30 / 34 I replaced the 40 mm bridge bolt. Since the bolt shape is tapered, custom feeling will rise! The screw length is purchased 4 pieces of 40 mm. Since it is 1 set 2 pieces, 2 sets are necessary! At this time, I want to check the screw length before purchase at the net "Brembo casting bridge bolt exchange" A lot of information came out other than the screw length when searching with. In the search, when replacing the bridge bolt with the stainless steel bolt, it became stronger against rust, but it was dangerous because the strength was lacking than the genuine bridge bolt! - - - In the retrieval information, Brembo casting replaced the stainless steel bridge bolt and it was damaged! There was none of the articles came out! Also, after exchanging, I did not use the brake hard on the circuit and pass etc., 125 cc It is installed in Grom, so I thought it would be fine even if I was relieved. If an accident occurred after replacing the bridge bolt earlier due to a dangerous thing, I think that it is not selling. After exchanging the caliper and bridge bolt, I use it without feeling anything uncomfortable, and the effectiveness of the brake is best than genuine. Be careful not to scrape with a panic brake!View Detail
Very Good
Appearance highestI tried to overhaul the Brembo caliper but I removed Bolt but something seems easy to do, so I decided to replace it because rust has also come with iron.
Even if it says anything, it looks better
Hexagonal Wrench also enters deeper, so it's hard to worry about it
It might be nice to have other coloring.
View Detail
Excellent
Stainless Steel to prevent rustStainless Steel, but Screw's head is polished and beautiful.
Just by exchanging with Screw attached to Body but using Torx wrench it is better to stabilize the car body so as not to hurt Bolt.View Detail
Excellent
It looks much betterI bought bremboCasting caliper and ordered to replace it from ironic Bolt when I purchased it. It was completely renewed and it got much better.View Detail
Excellent
The Bolt of the Caliper was changed into the Taper cap bolt.Although it thought that the Caliper would be exchanged, since it was satisfactory for the present engine performance, as it thought what it would do, it imitated by remembering the Taper specificThe Bolt of the Caliper was changed into the Taper cap bolt.Although it thought that the Caliper would be exchanged, since it was satisfactory for the present engine performance, as it thought what it would do, it imitated by remembering the Taper specification of a brembo by use about a Touring.It was felt refreshed in Design, became beautiful, and is very much satisfied.Although I felt that the price of the Bolts was somewhat high (eight is used by right and left), it is a STAINLESS-STEEL raw material and the satisfaction of the grade which can bind tight with sufficient Torque and it does not worry about a Cost from UP of Design nature satisfactorily for the engine performance (rigidity) was acquired.Although it was a half-Screw (Screw is turned off to half of Bolt) Type, since it was all the Screw (Screw is turned off to the head of Bolt) Types, the goods which placed an order and arrived were a little surprised at Mr. Webike's goods photograph from having wanted the half-Screw type and having purchased at the last.If it binds tight to the Caliper, since it was satisfactory, the buyer needs to recognize that a printing photograph differs from thing by there being no being efficient difference.View Detail
Most Viewed Reviews Of KOHKEN (KOHKEN DENKA) General-Purpose Bolts / Screws
Excellent
I have various opinions - - -Brembo : Brake caliper 30 / 34 I replaced the 40 mm bridge bolt. Since the bolt shape is tapered, custom feeling will rise! The screw length is purchased 4 pieces of 40 mm. Since it is 1 set 2 pieces, 2 sets are necessary! At this time, I want to check the screw length before purchase at the net "Brembo casting bridge bolt exchange" A lot of information came out other than the screw length when searching with. In the search, when replacing the bridge bolt with the stainless steel bolt, it became stronger against rust, but it was dangerous because the strength was lacking than the genuine bridge bolt! - - - In the retrieval information, Brembo casting replaced the stainless steel bridge bolt and it was damaged! There was none of the articles came out! Also, after exchanging, I did not use the brake hard on the circuit and pass etc., 125 cc It is installed in Grom, so I thought it would be fine even if I was relieved. If an accident occurred after replacing the bridge bolt earlier due to a dangerous thing, I think that it is not selling. After exchanging the caliper and bridge bolt, I use it without feeling anything uncomfortable, and the effectiveness of the brake is best than genuine. Be careful not to scrape with a panic brake!View Detail
Very Good
Appearance highestI tried to overhaul the Brembo caliper but I removed Bolt but something seems easy to do, so I decided to replace it because rust has also come with iron.
Even if it says anything, it looks better
Hexagonal Wrench also enters deeper, so it's hard to worry about it
It might be nice to have other coloring.
View Detail
Excellent
Stainless Steel to prevent rustStainless Steel, but Screw's head is polished and beautiful.
Just by exchanging with Screw attached to Body but using Torx wrench it is better to stabilize the car body so as not to hurt Bolt.View Detail
Excellent
It looks much betterI bought bremboCasting caliper and ordered to replace it from ironic Bolt when I purchased it. It was completely renewed and it got much better.View Detail
Excellent
The Bolt of the Caliper was changed into the Taper cap bolt.Although it thought that the Caliper would be exchanged, since it was satisfactory for the present engine performance, as it thought what it would do, it imitated by remembering the Taper specificThe Bolt of the Caliper was changed into the Taper cap bolt.Although it thought that the Caliper would be exchanged, since it was satisfactory for the present engine performance, as it thought what it would do, it imitated by remembering the Taper specification of a brembo by use about a Touring.It was felt refreshed in Design, became beautiful, and is very much satisfied.Although I felt that the price of the Bolts was somewhat high (eight is used by right and left), it is a STAINLESS-STEEL raw material and the satisfaction of the grade which can bind tight with sufficient Torque and it does not worry about a Cost from UP of Design nature satisfactorily for the engine performance (rigidity) was acquired.Although it was a half-Screw (Screw is turned off to half of Bolt) Type, since it was all the Screw (Screw is turned off to the head of Bolt) Types, the goods which placed an order and arrived were a little surprised at Mr. Webike's goods photograph from having wanted the half-Screw type and having purchased at the last.If it binds tight to the Caliper, since it was satisfactory, the buyer needs to recognize that a printing photograph differs from thing by there being no being efficient difference.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING