I bought this as a spare for my wife's motorcycle. It is much easier to grip than the OEM and my wife noticed the difference. I think I'll use this for my motorcycle too.
Fits: SUZUKI TC200 , SUZUKI DR250S SC44A SH, SUZUKI DR250S SC44A, SUZUKI TS125R , SUZUKI RMX250S -95
I bought it because it said it was compatible with DJEBEL250, so I thought it would also be compatible with XC, but the shape did not fit and I could not install it.
I contacted them in a panic to return it, but they asked me to send them a picture of the defective fit.
I took a picture of the re-installation and sent it to them, but they could not return it... (-_-;)
Please check carefully for incompatibility and be careful when purchasing.View Detail
Fits: SUZUKI TC200 , SUZUKI DR250S SC44A SH, SUZUKI DR250S SC44A, SUZUKI TS125R , SUZUKI RMX250S -95
[How is it used?
Installed on TS125R.
Application:Off-road
Used for about 6 years. Many times overturned.
Was the one you received as per Image?
As shown in the image. Since my hands are so small, I needed a lever position adjustment mechanism and a short lever to attach the hand guard.
Was the installation difficult?
The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it?
As it is a trail bike, I thought I would install something from a manufacturer specializing in off-road. (Brake Side) was good, but it felt slippery because of the mud.
The Clutch Side felt good, with no hand fatigue, even during Situations that required a lot of half-clutching.
There were no problems with the Brake Side, and the results were excellent.
After installing this, I regretted that ZETA's Pivot lever was better for Parenthesis. I regretted it. However, I gave up on it because it doesn't fit on the Brake Side.
Also, I have small hands. (Glove sizeM) It is often hard to find a good OEM lever, but this product has a good lever position. (Brake Side) In addition, it is possible to adjust the position for firm operation. If you have a small hand and you are not comfortable with the operation, we recommend that you introduce a short and lever position adjustable product including this product.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc.
After installation, lubricate the clutch lever with grease. (Lithium, Urea, Siliconetc.) However, by applying a thin layer, dust adhesion can be kept to a minimum.
If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis.
For off-road driving, dry rubs may be a better choice.
However, it does not last very long, so you will need to reapply after driving in the rain.View Detail
Fits: SUZUKI TC200 , SUZUKI DR250S SC44A SH, SUZUKI DR250S SC44A, SUZUKI TS125R , SUZUKI RMX250S -95
I really wanted a Foldable with a play adjustment Lever, but I didn't think so It was expensive and not a compatible car
I chose this one as the only one that fits and is cheap and reputable because cheap similar products have too bad a reputation
The result is Large Satisfaction
It fits exactly, and it's not strangely padded or foldable, so it's not rigid The Touch is very good, and the OEMLever has two fingers that can catch the outside finger when it is covered with two fingers It was Stress to feel, but that's almost gone (Although depending on how it's pulled, it can hit the ball.)
Since you will be putting your fingers on the outside of the Lever, you won't feel much of a difference in weight
You can recommend it with a score of 100View Detail
Fits: SUZUKI TC200 , SUZUKI DR250S SC44A SH, SUZUKI DR250S SC44A, SUZUKI TS125R , SUZUKI RMX250S -95
【What made you decide the purchase?】 There was only a short lever for DF 200 DJEBEL.
【How was it actually used?】 Personally I prefer Short, so it's not bad. There is no such thing as getting much better.
【Was it difficult to install? (Hard parts case)】 Depending on the year, it does not fit, so Small processing is required. It's not that difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Since it is not difficult, there is no particular point like Point or hang.
[Is there anything I was disappointed about?] Points that do not fit depending on the year. I arrived by Small processing, but if possible we want ALL MODEL to be aligned so that there is no need for processing.
【Hope for Manufacturer - Please tell me if there are any improvement points】 Minor I am happy that there are more variations in car parts as well.
【Have you compared items?】 I can not compare because there is no other Short lever.
[Others]View Detail
Fits: SUZUKI TC200 , SUZUKI DR250S SC44A SH, SUZUKI DR250S SC44A, SUZUKI TS125R , SUZUKI RMX250S -95
It has made somewhat longer and the portion to which a finger is applied is 2 and 3 duty.
I think that it is easy to use.
It bought as a spare Lever.
It has made somewhat longer and the portion to which a finger is applied is 2 and 3 duty.
I think that it is easy to use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING