3,617.72 HUF
(1,500 JPY)
2,988.23 HUF
(1,239 JPY)
(17% OFF)
5 (8 Minden vélemény)
Very Good
For dress-up and repair of seats!Ideal for repair or dress-up of old seats.
It is nerve-wracking because once you drill with the Drill, there is no going back, but if you do it with vigor, you will be fine.
Rust is becoming a concern because of Steel.
Reviews For DAYTONA Szegecsészlet From Other Webike User
Excellent
GORILLA's coloringI used it to replace a rusted Seat Rivet in GORILLA
Remove the old Rivet with Pliers and replace it to finish
The diameter was a little smaller than that of the NORMAL Rivet, but it did not bother me.
No special tools were required.View Detail
Very Good
Refresh with ease!It's been 26 years since My Monkey came to Japan with a new car.
I'm getting tired here and there.
On the Net, I happened to find this product, and since everyone's impressions were favorable, I bought it immediately.
Work with Kan Tan!
If you remove the Seat, you can replace it with just a Gold hammer and Radio pliers.
− working procedure
(1) Remove the Seat and tap the Rivet with a Gold hammer from the inside about 10 times.
(2) When you push Rivet from the outside, the clamping Gold is floating, so you can use Radio pliers to pry the clamping Gold inward little by little. (Rivet is still held from the outside.)
(3) A new Rivet was inserted into the existing hole from the outside.
(4) Push in the new clasp Gold from the inside using your fingertips.
Push it all the way down to the base, wrapping the excess leather around the Seat!
(5) Repeat 11 places. (In the case of a '95 12 VMONKEY)
→ finished!
It looks perfect, it's Polished!
Well, it's a world of self-satisfaction.
By the way, there will be 8 pairs left over for the 20-pack.
I can't help it because of Universal Product….View Detail
Excellent
I can trust.. Mounting EasyIt will fit perfectly as though it is an OEM. I am satisfied with the finish being Beauty. Seat is now like a brand new. It was good as it is the same as OEM.View Detail
Excellent
On COLLEDA SPORTSeat's Rivet was rusty so I exchanged it, I decided to decorate and half a fixed half rather than stop it. CRing is easy to wear, easy to wear, the head is also beautiful and good.View Detail
Excellent
DAYTONADAYTONA:Rivet setW650 【POSH FaithPosh Face : We installed Rivet on W1 Type Seat】. The feeling is very good, but it is better not to have Silver's Piping, is not it? Because it is a Low seat, it seems better if the person who attached the Rivet to the Seat of the W650 OEM will get a sense of VINTAGE ???View Detail
Most Viewed Reviews Of DAYTONA Clip / Push Rivets
Excellent
GORILLA's coloringI used it to replace a rusted Seat Rivet in GORILLA
Remove the old Rivet with Pliers and replace it to finish
The diameter was a little smaller than that of the NORMAL Rivet, but it did not bother me.
No special tools were required.View Detail
Very Good
Refresh with ease!It's been 26 years since My Monkey came to Japan with a new car.
I'm getting tired here and there.
On the Net, I happened to find this product, and since everyone's impressions were favorable, I bought it immediately.
Work with Kan Tan!
If you remove the Seat, you can replace it with just a Gold hammer and Radio pliers.
− working procedure
(1) Remove the Seat and tap the Rivet with a Gold hammer from the inside about 10 times.
(2) When you push Rivet from the outside, the clamping Gold is floating, so you can use Radio pliers to pry the clamping Gold inward little by little. (Rivet is still held from the outside.)
(3) A new Rivet was inserted into the existing hole from the outside.
(4) Push in the new clasp Gold from the inside using your fingertips.
Push it all the way down to the base, wrapping the excess leather around the Seat!
(5) Repeat 11 places. (In the case of a '95 12 VMONKEY)
→ finished!
It looks perfect, it's Polished!
Well, it's a world of self-satisfaction.
By the way, there will be 8 pairs left over for the 20-pack.
I can't help it because of Universal Product….View Detail
Excellent
I can trust.. Mounting EasyIt will fit perfectly as though it is an OEM. I am satisfied with the finish being Beauty. Seat is now like a brand new. It was good as it is the same as OEM.View Detail
Excellent
On COLLEDA SPORTSeat's Rivet was rusty so I exchanged it, I decided to decorate and half a fixed half rather than stop it. CRing is easy to wear, easy to wear, the head is also beautiful and good.View Detail
Excellent
DAYTONADAYTONA:Rivet setW650 【POSH FaithPosh Face : We installed Rivet on W1 Type Seat】. The feeling is very good, but it is better not to have Silver's Piping, is not it? Because it is a Low seat, it seems better if the person who attached the Rivet to the Seat of the W650 OEM will get a sense of VINTAGE ???View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING