Normál mérőóra mellé szerelhető, és kábelezés nélkül, párosra szerelhető.
* Részletek
Az 12500RPM kis DN-fordulatszámmérő felszerelhető a CT125-re (JA55) anélkül, hogy OEM alkatrészeket kellene módosítani vagy huzalozni, mivel egy mérőtartóval és alámagasztóval rendelkezik, amelyek az OEM sebességmérő mellett helyezhetők el. Meg tudom csinálni..
A kábelezés a Couplet-on-val csatlakoztatható.
A mérő tartó anyaga: acél fekete festéssel.
Φ48KicsiDN (DigitalNeedle) fordulatszámmérő
A mutatószöget teljes mértékben digitális jelek és a kis típusú motor vezérli, amely nagy megtartást és kiváló megbízhatóságot biztosít.
Az RPM funkció mellett a MeterBody tartalmaz még hőmérőt, órát, EngineWorkTimer-t és automatikus mérést (max.. Temp. rekord / max. fordulat)..
A fehér LED világítással ellátott fekete panel kiválóan alkalmas éjszakai felismerésre.
Rozsdamentes test.
934; 48 kis DN fordulatszámmérő Részletek
Elektromos fordulatszámmérő: -12 500 ford / perc
A monitor különféle funkciókkal rendelkezik (digitális kijelző)
Stick hőmérséklet érzékelő (150 Celsius fokig) A készlet tartalmazza, így az opcionális SP Takekawa leeresztőcsavarral megmérheti a leeresztőcsavar hőmérsékletét.
A külső levegő hőmérsékletét úgy mérheti, hogy a hőmérséklet-érzékelőt a takaróba helyezi.
Automatikus mérési funkció
A maximális hőmérsékletet és fordulatszámot a mérő felszerelésekor automatikusan rögzítik.
A menet után a mérő kijelzőjének átkapcsolásával ellenőrizheti a rekordot, és a rekord mindaddig mentésre kerül, amíg vissza nem hajtja.
· EngineWorkTimer
Időzítő, amely automatikusan hozzáadja a motor működési idejét 500 fordulat / perc felett.
500 fordulat / perc alatt megy le.
Maximum nagy idő: 9999 óra (Legfeljebb 100 órát rögzít percekben, több mint 100 órát órákban.. ) Visszaállítható. Rejtett beállításokkal
Cél távolság beállítása tartomány (10m egységek)
24 órás kijelző, nem kijelző beállítás
The "Φ48 Small DN Tachometer Kit 12500RPM" can be installed next to the standard meter without any wiring modification
■Details
This product comes with a meter bracket that can be placed next to the stock speedometer and a vehicle specific sub-harness, so you can install the Small DN Tachometer 12500RPM on the CT125 (JA55) without the need to modify the stock parts or wiring.
The wiring can be connected by coupler.
Meter bracket is made of steel with black paint finish.
■Φ48 Small DN (Digital Needle) Tachometer
The angle of the pointer is completely controlled by digital signals and a small motor, resulting in high pointer retention and excellent reliability.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
Stainless steel body.
■Φ48 Small DN Tachometer Details
・Electric tachometer with pointer: -12500rpm display
・The monitor is equipped with a variety of functions (digital display)
A thermometer (capable of measuring up to 150°C) and a stick temperature sensor are included, so you can measure the temperature at the drain bolt by purchasing SP Takegawa drain bolts (sold separately).
The temperature sensor can be mounted inside the cowl to measure the outside air temperature.
・Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.) Resettable.There is a non-display setting
・Clock
24-hour display with hide setting