Lebegő típus: Szilárd
a Jobbra
hátul
Mennyiség: 1db.
[Spec. ]
M8: 270 mm
SUS304Vastagság 0,8 t: 7,0 mm
min. TH. MIN: 6,5 mm
Belső átmérő: 130mm
PCD: 150mm
(Használati korlát) : 6
Átmérő: 10mm
Eltolás: 7mm
Pad hatásos szélessége: 32mm
OuterType: hole
* Felhívjuk figyelmét, hogy a termékleírás a gyártó indokai miatt változhat.
*Csavaros szerelés a kisebb átmérő miatt nem lehetséges. Kérjük, értse meg előzetesen.
*Ezeket a lemezeket a Z1000MkII és a Z1-R hátsó részére fejlesztették ki, de ismert, hogy ezeknek a modelleknek a készletkorongjaihoz három különböző eltolási méret tartozik.
*Annak érdekében, hogy kompatibilis legyen az ilyen típusú járművekkel, a Sunstar kifejlesztett egy olyan terméket, amelynek legkisebb eltolási mérete van, és az 1,0 mm vastagságú távtartó külön kapható, így a termék más méretű tárcsákkal is használható.
*A Sunstar lemezek eltolása 22,0 mm.
Ha a lemez nem 22,0 mm -es, vásárolja meg a szükséges számú távtartót.
* Más típusok és színek is szerepelhetnek a képen.
■For right
[Quantity] 1pc.
[Specification]
・Floating type: solid
・For rear
・Outer diameter: 270 mm
Board thickness:7.0 mm
・MIN.TH. (Usage limit): 6.5 mm
・Inner diameter: 130 mm
・PCD: 150 mm
・Number of holes: 6
・Diameter: 10 mm
・Offset: 7 mm
・Effective pad width: 32 mm
・Outer type: hole
*Bolt-on installation is not available due to the smaller diameter.
*These discs were developed for the rear of the Z1000MKII and Z1-R, but it is fact that there are three different offset dimensions for the stock discs of these models.
*In order to be compatible with these types of vehicles, Sunstar has developed a product with the lowest offset dimension, and a spacer with a thickness of 1.0mm is available separately so that the product can be used with discs of other dimensions.
*The offset dimension of Sunstar discs is 22.0mm.Some models have 23.0mm or 24.0mm disc. Please check the offset amount and if it is not 22.0mm, purchase the necessary number of compatible spacers.
*The images may include other types and colorings.
*There may be changes in product specifications due to the manufacturer's reasons.