Szín: fekete eloxált
A legnagyobb hátsó kerék sugara
+ 6cm = 225mm
+ 12cm = 250mm
+ 16cm = 270mm
+ 20cm = 305mm
A hátsó felfüggesztés beépítési helyzete
+ 6cm = 245mm
+ 12cm / + 16cm / + 20cm = 310mm
Tartozékok: M12 Hosszú tengely tengely L = 290 mm
Gyártó cég: KEPSPEED
Származási hely: Kína
* Az M12 hosszú tengely tengely L = 290 mm. Az állományhosszúságú tengelyek nem használhatók.
* Láncbeállító és állványhorog titán színben.
[Telepítés]
* Ezt a lengőkart úgy tervezték, hogy állítás nélkül is használható legyen, ha komplett készlettel együtt használják.
* Felhívjuk figyelmét, hogy nem ellenőrizte a kombináció összehangolását más cég termékeivel, ezért kérjük, nyugtázza.
* Kérjük, végezzen szerelési munkát, ha egy motorkerékpár karbantartásában tapasztalt.
* A hajtáslánc kereteinek száma az ügyfél járműjének állapotától, valamint az első és hátsó lánckeréktől függően változik, ezért a GM-MOTO nem ad erről információt.
* Kérjük, ellenőrizze, hogy van-e rendellenes érintkezési pont akkor is, ha a hátsó futómű teljes alsó állapotban van.
* Kérjük, hajtson végre egy eljárást az alátéttel való hézag csökkentésére, ha a váz és a lengőkar között legalább 0,5 mm-es rés van.
* Lehetséges, hogy a legrosszabb esetben károsítja a forgástengelyt, miközben a hézag nagy, nagy teher lehet a lengőkarra.
* Előfordulhat, hogy az egyes termékek részletes részében kismértékű változás következik be. Van egy pont, amely kissé eltér a bevezető képtől, de elsőbbséget adok a tényleges dolognak, ezért kérem, értse meg, kérem.
* Motorkerékpár-karbantartó technikust keresünk összeszerelési munkák elvégzésére motorkerékpár-karbantartó szaküzletbe.
* Kérjük, figyeljen az ún. "Kezdeti lazaság" előfordulására a futás kezdete után, kérjük, végezzen gyakori vizsgálatokat, hogy ne okozzon váratlan problémákat.
* A kép más termékeket is tartalmazhat.
* Felhívjuk figyelmét, hogy a termékleírás a gyártó indokai miatt változhat.
■Color: Black Anodized Aluminum
■Maximum rear wheel radius
+6cm = 225mm
+12cm = 250mm
+16cm = 270mm
+20cm = 305mm
■Rear suspension installation position
+6cm = 245mm
+12cm / +16cm / +20cm = 310mm
■Components: M12 Long Axle Shaft L=290mm
■Manufacturing company: KEPSPEED
■Country of origin: China
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*M12 Long Axle Shaft L = 290mm is included.Stock length axle shafts cannot be used.
*Chain adjuster and stand hook in titanium color.
[About the installation]
*This swingarm is designed to be used without adjustment when the complete kit is used.
※GM-MOTO has not verified the consistency of the combination with other companies' products.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.