Super Multi LCD Meter" for Cygnus X SR (FI) (SED8J), a multi-functional meter that can be installed without any wiring modification, simply by replacing the stock meter.
In addition to the functions of the factory meter, engine temperature, air-fuel ratio, and battery voltage can also be displayed!
The super multi LCD meter is also equipped with a number of other functions, such as a peak hold function for RPM, speed and temperature, front tire outer diameter compensation, and backlight color change.
By selecting the power test mode separately, it also has a function to measure the section acceleration time (with graph display) as a function for competition.
■Speedometer
-199km/h in 1km increments Tire O.D. correction input possible
Automatic maximum speed record
Tachometer -14000rpm
Two types of tachometers: pointer type tachometer/numeric type tachometer
LED gauge type tachometer (red LED) lighting pattern selectable and lights off
Also serves as RPM alarm indicator LED blinks when setting is exceeded
Alarm display speed can be set arbitrarily between 3000-19900 rpm in 100 rpm increments
■Odometer (arbitrary starting distance input possible)
99999km 1km unit
■Trips (Eliminable mileage) A / B
9999.9km 0.1km unit
■Oil trip 9999 km in 1 km increments
■Oil check
User-definable in 100 km increments between 100 km and 9900 km
OIL CHECK is displayed at the bottom of the meter when the distance is passed.
Engine temperature/air fuel ratio/gasoline gauge
■Gasoline Gauge
10-step display Sensor resistance compensation possible
■Engine temperature (no additional sensor required)
Signal from stock ECU is used for display
■A/F ratio (no additional sensor required)
Signal from stock ECU is used for display
The TEMP (engine temperature) and A/F (air-fuel ratio) that can be displayed on this meter are calculated based on the information output from the vehicle's stock ECU.
If you measure separately with an external meter, the displayed value may differ.
Display switching/indicator lamp
■Various backlight settings
Backlight brightness change (5 levels)
Backlight color change (green, light blue, blue, purple, pink, red, orange, yellow, white)
Character display negatives and positives can be inverted.
■Various indicators
blinker (green)
High beam (blue)
FI CHECK (Yellow)
Speed warning (blue)/Temperature warning (red)
Air-fuel ratio display (red-green-blue)
■Power test mode (fully automatic acceleration measurement function)
This is a fully automatic acceleration measurement function that automatically starts measurement when the front wheel starts to rotate.
Measurement stops automatically when the set running time or distance is reached.
Settable time: 5-60 seconds (in increments of 5 seconds)
Configurable distance
20, 30, 40, 50, 60, 70, 80, 90, 100, 200, 300, 400, 500, 1000(m)
The recordings can be stored for 9 measurements and can be read out and checked after each run.
The distance traveled and the speed at which the distance is reached are recorded in 0.1 second increments from the start of the trip, as well as the final values of the distance traveled and the speed at which the distance is reached.
Also, there is a function to easily move to the first data after 50, 100, 200, 400, 500, or 1000 meters of riding distance.
For example, the record is measured at 400m and the reference time at 100m can be easily displayed.
Similarly, there is a function to move to the first data beyond 50, 100 and 150 km/h.
(Note that the record is in increments of 0.1 second, so it is not the exact distance or speed, but the first record that exceeds the selected value.)
The data can be erased at any time after each measurement, but the data will not be lost even if the key is turned off or the battery is removed from the meter unless the data is erased.