Többfunkciós mérőeszköz, amely telepítés nélkül telepíthető, stb. egyszerűen kicserélve az OEMMeter "Super Multi LCD Meter" készülékkel!
Az OEMMeter, a motor hőmérséklete, a levegő-üzemanyag arány funkció mellett az akkumulátor feszültsége is megjeleníthető!
A Super Multi LCD-mérő számos funkcióval rendelkezik, mint például a forgási sebesség csúcsmegtartó funkciója · fordulatszám · hőmérséklet, első kerék A gumiabroncs külső átmérője korrekció, hátsó fényváltozás stb.. A Powertest MODE (Gyorsítási idő mérése) funkció külön kiválasztásával (Grafikus kijelzővel) Mi is van.
[A PowertestMODE-ről]
Teljesen automatizált gyorsulásmérési funkció, és automatikusan elkezdi a mérést az első kerék forgási indításával együtt.
A beállított futási idő vagy távolság elérésekor automatikusan mérje meg és állítsa le.
Konfigurálható idő: 5-60 másodperc (5 másodpercen belül).
Állítható távolság: 20 · 30 · 40 · 50 · 60 · 70 · 80 · 90 · 100 · 200 · 300 · 400 · 500 · 1000 (m)
Lehetőség van a 9 rekord memóriájának rögzítésére, a futtatás után olvasható és ellenőrzött.
Az utazás kezdetétől számított 0,1 másodperces lépésekben nem csak a beállított menetidő elérésekor és a távolság elérésekor a sebesség elérésekor a menetsebesség, a sebesség és a motor forgási száma kerül rögzítésre. lehetőség van az adatok értékének ellenőrzésére a Graph segítségével, és van egy funkció, amely könnyen átviheti az első adatokat, amelyek kilométere meghaladja az 50, 100, 200, 400, 500, 1000 m.
Például 400 méterre mérheti a felvételt, és könnyen megjelenítheti a referenciaidőt, amikor 100 métert továbbít. Hasonlóképpen, az első, az 50, 100, 150 km / h értéket meghaladó adatokra való áttérés igen.
(Azonban mivel a felvétel 0.1 másodperces egységekben van, az első rekord meghaladja a kiválasztott értéket, nem pedig a pontos távolságot vagy sebességet.)
A felvétel tetszőlegesen törölhető minden mérésnél, de hacsak nem törli, a kulcs kikapcsolásával vagy az akkumulátor lemerülésével a mérő nem törli az adatokat.
The "Super Multi LCD Meter" is a multi-functional meter that can be installed simply by replacing the stock meter without any wiring modifications!!
In addition to the functions of the stock meter, engine temperature, air-fuel ratio, and battery voltage can also be displayed!!!
The Super Multi-LCD meter is also equipped with a number of other functions, such as a peak hold function for RPM, speed, and temperature, front tire diameter compensation, and backlight color change.By selecting the power test mode separately, it also has a function to measure the section acceleration time (with graph display) as a function for competition.
[About Power Test Mode]
This is a fully automatic acceleration measurement function that automatically starts measurement when the front wheel starts to rotate.
Measurement stops automatically when the set running time or distance is reached.
Configurable time: 5-60 seconds (in 5 second increments).
Configurable distance: 20・30・40・50・60・70・80・90・100・200・300・400・500・1000 (m)
The recordings can be stored for 9 measurements and can be read out and checked after each run.
The distance traveled and the speed at which the distance is reached are recorded in 0.1 second increments from the start of the trip, as well as the final values of the distance traveled and the speed at which the distance is reached, and the values at any given position can be viewed in a graph.Also, there is a function to easily move to the first data after 50, 100, 200, 400, 500, or 1000 meters of riding distance.
For example, the record is measured at 400m and the reference time at 100m can be easily displayed.Similarly, there is a function to move to the first data beyond 50, 100 and 150 km/h.
(Note that the record is in increments of 0.1 second, so it is not the exact distance or speed, but the first record that exceeds the selected value.)
The data can be erased at any time after each measurement, but the data will not be lost even if the key is turned off or the battery is removed from the meter unless the data is erased.