10 hüvelykes, 12 hüvelykes hátsó szettek beállítása esetén a MotorPivot pozíciója az optimális lábtartó pozíció.
Emellett, mivel a súlypont alacsony, a karosszéria stabilitása nő, és az eredeti motorkerékpár kezelésének örömét tovább lehet növelni.
A motor beépítési helyzetét a karosszéria középpontjától balra 7 mm-re lehet mozgatni, így a 4JWide kerék vagy az NSRWheel stb.. használható Offset sprocketetc használata nélkül. (Kérjük, használja a mellékelt színt.)
1. téma: Fejcső egységes
Fejcső egységesen vágva, A keret részei nem összeszerelve az összes csavarszerkezettel.
Minden motortartó és lendítő kar pivotPlate részei olyan szerkezetűek, amelyek nem kapják meg a terhelést a Bolt nyírási irányában, a Knock Pin feldolgozásával minden csavaros alkatrészre, és nagy szilárdságot érnek el.
2. funkció: Oldalsó típusú felfüggesztés fogadás
A MONKEYFrame elfogadta az első Side mount típusú felfüggesztő vevőt.
Célunk, hogy a pisztrángot koncentráljuk és a gyakorlási teljesítmény javítására törekszünk.
A felfüggesztés fogadó része excentrikus mechanizmussá vált, és könnyebbé teszi a jármű magasságának forgatását. (± 5 mm)
3. funkció: Közvetlen rögzítés
A hátsó szettek a keretre és a közvetlenre történő szerelésével a hajlítás elhárításával javítjuk a működőképességet.
4. funkció: Állítható pivot
Pivot nyakörv "Center type" "Off-set Type" Két típus van beépítve, és lehetséges a Swing Arm lógási szögének megváltoztatása. (Normál helyzet, 4 mm felfelé és lefelé mozog.)
■ választási lehetőség
? 39961 Csapágyfutás Nyomáscsatlakozás
· 39974 Fékpedál-tengely
* Normál fékpedál és a motor rögzítése megerősített lemez (39407) Egyidejű telepítésére szolgál.
· 39945 Fékpedál-tengely rövid
* A motor rögzítése megerősített lemez (39407) Ezt csak a telepítéskor használják.
? 39965 British Silver for Oil cooler gyártmányú KITACO (Fekete termék száma 39948)
· 39966 tartó EARLS olajhűtőt ezüst (Fekete termék száma 39949)
The engine pivot position is designed to be the optimum step position when using a 10" or 12" rearset.
In addition, the low center of gravity increases the stability of the body and allows the rider to enjoy the original fun of riding a motorcycle even more.
Since the engine mounting position can be moved 7mm to the left from the center of the vehicle, 4J wide wheels and NSR wheels can be used without using offset sprockets.(Please use the supplied collar for each.)
Feature 1: Head pipe machined in one piece
The head pipe is machined in one piece and all frame parts are assembled with bolts without welding.
All engine mounts and swingarm pivot plates are designed with knock pins on the threaded portions to prevent the bolts from receiving shear loads and to achieve high strength.
Feature 2: Side mount type suspension support
The first side-mounted suspension support for a monkey frame.
The aim is to concentrate the mass and to improve the driving performance.
The suspension support part is eccentric mechanism, and it is easy to adjust the ride height by rotating it.(±5mm)
Feature 3: direct mount
The rearset is mounted directly to the frame to reduce flex and improve maneuverability.
Feature 4: variable pivot
Two types of pivot collars are included, center type and offset type, which allows you to change the swingarm's droop angle.(Standard position, can be moved 4mm up and down.)
■Options
・39961 Press-fit machining of bearing race
・39974 Brake pedal shaft
*For use when installing the stock brake pedal and engine mount reinforcement plate (39407) at the same time.
・39945 Brake Pedal Shaft Short
*For use when installing the engine mount reinforcement plate (39407) only.
・39965 Bracket for KITACO Oil Cooler Silver (Black is part number 39948)
・39966 Silver bracket for Earl's oil cooler (Black is part number 39949)