Majom / GORILLA, NSR50 / Ez Swing Arm, amely illeszkedik 80 Kerekek.
Lengő kar A szélesség 184-187 mm.
NSR50 / Lehetõség van arra, hogy a MONKEY 12 hüvelykét használjuk a 80-as 12 colos kerékkel.
■ Opció Leírás
[Swing Arm finish]
・ Fekete eloxált felületkezelés (GCraft cikkszáma : 60198) Tasu25000 jen
・ SeraCoat kivitel (GCraft cikkszáma : 60807) Tasu30000 jen
[Mi a SeraCoat?]
A SeraCoat egy NIC által készített festék, amelyet jelenleg az Egyesült Államok katonai csapatában használnak, különleges sütőfesték, hidegfesték.
Ellenőrzött, hogy képes legyen megbirkózni a kemény körülmények között, és ez egy olyan festék, amelyet előállítottak és gyártottak a teljesítmény hangsúlyozásához, mint például hőállóság, kopásállóság, tartósság, oldószerállóság, hőelvezetés, hőszigetelés stb.
A kerámiát egy különleges gép porítja, és festékkel keverik, hogy javítsa a bevonófólia szilárdságát 。 Emiatt szaténszerű felület lesz, de a bevonat nagyon vékony lehet (25Micron)
Hegesztési jelek (Bead) Elrejtés nélkül is el lehet menni.
A tapadás a legmagasabb érték a bevonóanyagok között. A ráncok még összehajtogatás nélkül is kialakíthatók, a festéket nem könnyű lehúzni a lépcsőkön, így alkalmas a keretre, a lengőkar felületi kezelésére.
* Normál szállítási határidő + 3-5 hét.
[Választási lehetőség : Lánc csúszkaSpec.]
Lánc csúszkaBolt stop Spec. (GCraftProductNo : 60228) +1000 jen
Cserélje ki a Lánc csúszkáját a Szegecstől a Bolt Stopig 。 Könnyen cserélhető kopáskor.
[Választási lehetőség : Stand HookBase hozzáadása feldolgozás]
Stand HookBase (M6) További feldolgozás (GCraftProductNo : 60903) +3000 jen
GCraft készlet állvány vagy a cégen kívül állvány Hook, (M6) Telepíthető.
[Választási lehetőség : Forgóvázszerkezet]
Forgócsapágy-specifikáció (GCraftProductNo : 60006) +3000 jen
A Standard módosítja a Bush a Bearing Pivot részét.
Megnövelt tartósság és sima működési jellemzők valósulnak meg.
[Választási lehetőség : Lánc húzása Spec.]
Lánc húzása Opció
・ Racing Stand HookSpec. (GCraft cikkszáma : 60186) +3000 jen
Megváltoztatjuk a hagyományos Lánc-rajzot HookSpec állványra. 。 GCraft rész száma : 32071 ・ 32072 ・ 32073 Racing Stand Hook felszerelhető.
* GCraft alkatrész száma : 33170APLockheed caliperSupport nem szerelhető (És interferencia)
・ Behúzás típusa (GCraft rész száma : 60221) +3000 jen
Ez egy hátsó rajzoló Kiigazító, amelyet úgy terveztek, hogy kiküszöbölje a karbantartás problémás karbantartását a beállításkor.
Lengőkar, miután beállította az anyát a hátsó részhez, könnyű beállítani a beállítási részt, amelyet nehéz volt megfordítani a szerszámok interferenciája miatt stb.
* Racing Stand HookSpec., Az OWType nem telepíthető egyszerre
・ OWType (GCraft cikkszáma : 60014) +3000 jen
A lánckerék Taper segítségével történő feldolgozásával megszüntettük a tengelycsap felső és alsó rétegeit.
Mivel a feldolgozott darab elindul, nincs felső és alsó rés 。 Ez egy olyan mechanizmus, amelyet a Big Bike Swing Armja is elfogad.
・ OWType Racing állvány HookSpec. (GCraft cikkszáma : 60188) +5000 jen
Változás OWTypeChain kivonás HookSpec hátsó állásra.
GCraft rész száma : 32071 ・ 32072 ・ 32073 Racing Stand Hook felszerelhető.
* GCraft alkatrész száma : 33170APLockheed caliperSupport nem szerelhető (És interferencia)
・ Excentrikus típus (GCraftProductNo : 60199) Tasu6000 jen
A Kawasaki Motorkerékpár általánosan megtalálható excentrikus formula lánchosszúsága.
* A * discSpec-hez való használathoz csak a Caliper típusú Caliper támogatás használható a Swing Arm alján.
* a Wide WheelSwing Arm esetében csak a discSpec segítségével használható.
This is a swingarm that can be used with NSR50 / 80 wheels on Monkey / Gorilla.
Swingarm width is 184-187mm.
Using the 12 inch wheel of NSR50 / 80 to convert the Monkey to 12 inch can be done.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools.
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.