Széles szélesség a MONKEYSwing karhoz (Széles hubhoz) A Swing Arm egy 187-190 mm szélességű Swing Arm.
Exkluzív nyakörv van csatlakoztatva, így a MONKEYOEM hub használható.
Lemezkészítéskor a GCraft termékszám: 39048 Wide hátsó lemezes hub használható.
Opció Leírás
[Swing Arm finish]
· Fekete eloxált felületkezelés (GCraft termékszám: 60198) + 25000 jen
? SeraCoat kivitelben (GCraft termékszám: 60807) +30000 jen
[Mi a SeraCoat?]
A SeraCoat egy NIC által készített festék, amelyet jelenleg az Egyesült Államok katonai csapatában használnak, különleges sütőfesték, hidegfesték.
Ellenőrzött, hogy képes legyen megbirkózni a kemény körülmények között, és ez egy olyan festék, amelyet előállítottak és gyártottak a teljesítmény hangsúlyozásához, mint például hőállóság, kopásállóság, tartósság, oldószerállóság, hőelvezetés, hőszigetelés stb.
A kerámiát egy speciális gép porítja, és a festékhez hozzáadja a festék erejét. Ezért matt felületű lesz, de a festékfólia nagyon vékony lehet (25Micron)
Hegesztési jel (Bead) Elrejtés nélkül is el lehet menni.
A tapadóképesség a legmagasabb érték a bevonóanyagok között, a ráncok még összehajtogatás nélkül is kialakíthatók, a festéket nehezen lehúzzák a léptető kövekből, így alkalmas a keretre, a Swing Arm felületkezelésére.
* Normál szállítási határidő + 3-5 hét.
[Opció: Lánc csúszkaSpec.]
LánckerékBolt stopper Spec. (GCraft termékszám: 60228) +1000 jen
Cserélje a Lánc csúszkáját a Szegecs stop-ről a Bolt-stop-ra. Könnyen cserélhető, ha kopott.
[Opció: Stand Hook Base kiegészítő feldolgozás]
Stand HookBase (M6) További feldolgozás (GCraft termékszám: 60903) +3000 jen
GCraft készítésű állvány, vagy kívülről készült állványhorog (M6) Telepíthető.
[Opció: Forgóvázszerkezet]
Forgócsapágy-csapágy specifikáció (GCraft termékszám: 60006) +3000 jen
A Standard módosítja a Bush a Bearing Pivot részét.
Megnövelt tartósság és sima működési jellemzők valósulnak meg.
[Opció: Lánc specifikáció Spec.]
Lánc opció opció
· Racing Stand HookSpec. (GCraft termékszám: 60186) +3000 jen
Állítsa be a hagyományos láncszem rajzot HookSpec állványra. GCraft termékszám: 32071? 32072? 32073 Racing Stand Hook felszerelhető.
* GCraft termékszám: 33170 APLockheed caliperSupport telepítés nem lehetséges (Beavatkozik)
? Vissza szívó típus (GCraft termékszám: 60221) +3000 jen
Ez egy hátsó rajzoló Kiigazító, amelyet úgy terveztek, hogy kiküszöbölje a karbantartás problémás karbantartását a beállításkor.
Lengőkar, miután beállította az anyát a hátsó részhez, könnyű beállítani a beállítási részt, amelyet nehéz volt megfordítani a szerszámok interferenciája miatt stb.
* Racing Stand HookSpec., Az OWType nem telepíthető egyszerre
· OWType (GCraft termékszám: 60014) +3000 jen
A lánckerék Taper segítségével történő feldolgozásával megszüntettük a tengelycsap felső és alsó rétegeit.
Kúpos Mivel a feldolgozott darab mozgásban van, nincs felső és alsó rés, amelyet a Big Bike Swing Arm is elfogad.
· OWType Racing Stand HookSpec. (GCraft termékszám: 60188) + 5000 jen
Változás OWTypeChain kivonás HookSpec hátsó állásra.
GCraft termékszám: 32071? 32072? 32073 Racing Stand Hook felszerelhető.
* GCraft termékszám: 33170 APLockheed caliperSupport telepítés nem lehetséges (Beavatkozik)
? Excentrikus képlet (GCraft termékszám: 60059) + 5000 jen
A Kawasaki Motorkerékpár általánosan megtalálható excentrikus formula lánchosszúsága.
* Ha a * discSpec-hez van használva, akkor csak a Caliper típusú támogatást használhatja a Swing Arm alján rögzített Caliper-rel.
* a Wide WheelSwing Arm esetében csak a discSpec segítségével használható.
Wide width swingarm for Monkey (for wide hub) is swingarm made by 187-190mm width.
A special collar is included so that the stock Monkey hub can be used.
When converting to discs, you can use G-Craft part number 39048 wide rear disc hubs.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools.
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60059)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.