Vízhőmérséklet-megfelelés (-19,5 és 99,9 fok között)
[A termék tartalma]
Kompakt hőmérsékletmérő test 1 x 1 db.
Thermistor (R1 / 8 kúpos csavaros érzékelő) x 1db.
Termisztoros összekötő kábel (Kb. 1000 mm) x 1db.
tépőzáras (25 mm x 55 mm) x 1db.
Tartalék akkumulátor (LR44Type) x 1db.
Használati útmutató x 1pc.
zajcsökkentő szűrővel
* Nem használható olajhőmérséklet-mérőként.
* Nincs hátsó fény, figyeli a funkciókat.
* Nincs hátsó fényfunkció vagy óra funkció.
* Néhány modell vízhőmérséklet-kijelzője nem stabil, ha zajcsökkentő szűrő van (63847) telepítve van.
* Kérjük, vegye figyelembe, hogy használható termisztor (megállapított ellenállási érték) a terméktől függően eltérő lehet.
A termisztor meghúzási nyomatéka (R1 / 8 kúpos csavar érzékelő) 10-13,5 Nm.
* Ha újra kell használni a termisztort (R1 / 8 kúpos csavar érzékelő) , használjon új tömítőszalagot.
* Ha ezt a terméket fűtött állapotban használják, például nyári napokon, akkor a folyadékkristályos panel fekete lesz. Ez akkor történik, ha a panel hőmérséklete meghaladja a megengedett tartományt, és akkor oldódik meg, ha a mérőhőmérséklet hőmérséklete lehűl.
* Nincs zajcsökkentő szűrő.
* Az alkalmazandó modelleket vízhőmérséklet-mérőként használják. Cserélje ki a készülékhez csatlakoztatott érzékelőt a valódi érzékelővel.
* Kérjük, vegye figyelembe, hogy a HONDA HORNET600 telepítési helye a hengerfej hátsó részévé válik.
Water temperature support (-19.5 to 99.9 degrees)
[Product Description]
・Compact balance meter body x 1
・Thermistor (R1/8 taper screw sensor) x 1
・Thermistor joint cable (approx. 1.000mm) x 1
・Velcro (25mm x 55mm) x 1
・Spare button battery (LR44 type) x 1
・User's Manual x 1
With noise cut filter
*Not for use as an oil thermometer.
*No backlight function, no clock function.
*In some vehicles, the water temperature display may not be stable unless a noise cut filter (63487) is installed.
*The thermistor (setting resistance value) that can be used differs depending on the product.
*Tightening torque for thermistor (R1 / 8 taper screw sensor) is 10-13.5N-m.
*When reusing and installing the thermistor (R1 / 8 taper thread sensor), be sure to use a new sealing tape.
*If this product is used under the hot sun in the summer, the LCD panel may turn black.This phenomenon occurs when the temperature of the LCD panel exceeds the allowable temperature, and can be solved by lowering the temperature of the meter itself.
*Compatible models are for use as a water temperature gauge.Replace the sensor supplied with the product with the stock sensor.
*Only HONDA HORNET600 is installed at the rear of the cylinder head.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.